Best Twin City Skate Sharpener
Moderators: Mitch Hawker, east hockey, karl(east)
Best Twin City Skate Sharpener
Ok who's the best?
-
- Posts: 185
- Joined: Wed Nov 15, 2006 2:58 pm
-
- Posts: 348
- Joined: Sun Dec 11, 2005 10:24 pm
- Location: Northern Southern Minnesota
Daves nad letterman of the north metro area consistintly have problems Hat Trick Hockey in Anoka and Richfeild have been among the best skate sharpeners for years and will remain that way with many current and former pro players among the top of their customer list. They are always having to fix problems cause by daves, lettermans and the worst of all Tahoe Sports!! Stay away from those 3 places if you are in the north metro!!
There's a little tiny place in Plymouth on 55 - I think it's called Score Sports or something... looks like an old 1 bedroom house that's crammed full of gear, and you have to go down to the dank basement where all of their sticks are (they can't fit them on the main floor) to get skates sharpened. It's just an old, unfinished concrete basement.
I went there one time a couple of years back, and I think they did an ok job - seemed to last for a while.
It's a really interesting place.
I went there one time a couple of years back, and I think they did an ok job - seemed to last for a while.
It's a really interesting place.
It's just down the road from where I work so I had them do it once... some pimply faced dork took about 15 seconds on each skate and managed to grind my left blade into something that felt like a 45 degree angle... I had no inside edge.breakout wrote:Hockey Giant provides free skate sharpening to those that purchase their skates from them. Get what you pay for? Thus far, the poll seems to agree.
I skated 2 practices and took them back Strauss.
Can't say I am stunned by your experience.Govs93 wrote:It's just down the road from where I work so I had them do it once... some pimply faced dork took about 15 seconds on each skate and managed to grind my left blade into something that felt like a 45 degree angle... I had no inside edge.breakout wrote:Hockey Giant provides free skate sharpening to those that purchase their skates from them. Get what you pay for? Thus far, the poll seems to agree.
I skated 2 practices and took them back Strauss.
In my opinion, quality and consistently good skate sharpening brings people in the door. Once they're in the door other items can and will be sold.
If I was in the business of catering to hockey types, I would lead with the best possible skate sharpening.
-
- Posts: 861
- Joined: Fri Mar 12, 2004 4:09 pm
Hat Trick is Best
I believe Hat Trick in Anoka has to be the best!
-
- Posts: 40
- Joined: Sun Feb 25, 2007 9:36 pm
-
- Posts: 4345
- Joined: Thu Sep 14, 2006 3:55 pm
This is a good topic.....
Knowing a bit about this subject I'll share some insight.
1st it's not so much where you get your skates done it's who's behind the machine and their knowledge of the principles.
The first consideration is the rocker of the blade..this is is determined by the size and style of skater, a smaller light weight agile skater should have a smaller rocker say 11' rocker where as a heavier 6' + tall skater should be closer to the 12'- 13' mark rocker...this is all determined by radial push from the hips to keep maximum contact with the ice thru the stride.
Next is the blade radius this also has a bit to do with size but again more to do with position they play...a smaller size fwd. player that makes a lot of aggressive moves can utilize a deeper radius say as small as 1/4" to 3/8" but will give up speed for the agility.
A defensive player that's more concerned with being able to adjust quickly will also use a smaller radius as speed is not as important as making the quick adjustments to the on coming fwd's.
A bigger fwd. player that needs flat out speed will go as high as 3/4"-1" radius.... they give up the hard cuts for the breakaway speed.
The centering of the radius is probably the most important factor, there should be no more then .002" difference between the the high points on either side of the blade...very few places I've seen actually have a gage to measure this.
After all the above is completed the last factor is the honing of the edges this should be done both before and after the skate is sharpened...the before removes any side nicks in the blade and allows for a very easy job of removing the sharpening burrs after sharpening.
If the place you get your skates done does all this you have found the sweet heart of skate sharpening... best of luck..but get what your paying for....
Knowing a bit about this subject I'll share some insight.
1st it's not so much where you get your skates done it's who's behind the machine and their knowledge of the principles.
The first consideration is the rocker of the blade..this is is determined by the size and style of skater, a smaller light weight agile skater should have a smaller rocker say 11' rocker where as a heavier 6' + tall skater should be closer to the 12'- 13' mark rocker...this is all determined by radial push from the hips to keep maximum contact with the ice thru the stride.
Next is the blade radius this also has a bit to do with size but again more to do with position they play...a smaller size fwd. player that makes a lot of aggressive moves can utilize a deeper radius say as small as 1/4" to 3/8" but will give up speed for the agility.
A defensive player that's more concerned with being able to adjust quickly will also use a smaller radius as speed is not as important as making the quick adjustments to the on coming fwd's.
A bigger fwd. player that needs flat out speed will go as high as 3/4"-1" radius.... they give up the hard cuts for the breakaway speed.
The centering of the radius is probably the most important factor, there should be no more then .002" difference between the the high points on either side of the blade...very few places I've seen actually have a gage to measure this.
After all the above is completed the last factor is the honing of the edges this should be done both before and after the skate is sharpened...the before removes any side nicks in the blade and allows for a very easy job of removing the sharpening burrs after sharpening.
If the place you get your skates done does all this you have found the sweet heart of skate sharpening... best of luck..but get what your paying for....
-
- Posts: 5339
- Joined: Fri Jan 28, 2005 12:48 pm
Can't Never Tried wrote:This is a good topic.....
Knowing a bit about this subject I'll share some insight.
1st it's not so much where you get your skates done it's who's behind the machine and their knowledge of the principles.
The first consideration is the rocker of the blade..this is is determined by the size and style of skater, a smaller light weight agile skater should have a smaller rocker say 11' rocker where as a heavier 6' + tall skater should be closer to the 12'- 13' mark rocker...this is all determined by radial push from the hips to keep maximum contact with the ice thru the stride.
Next is the blade radius this also has a bit to do with size but again more to do with position they play...a smaller size fwd. player that makes a lot of aggressive moves can utilize a deeper radius say as small as 1/4" to 3/8" but will give up speed for the agility.
A defensive player that's more concerned with being able to adjust quickly will also use a smaller radius as speed is not as important as making the quick adjustments to the on coming fwd's.
A bigger fwd. player that needs flat out speed will go as high as 3/4"-1" radius.... they give up the hard cuts for the breakaway speed.
The centering of the radius is probably the most important factor, there should be no more then .002" difference between the the high points on either side of the blade...very few places I've seen actually have a gage to measure this.
After all the above is completed the last factor is the honing of the edges this should be done both before and after the skate is sharpened...the before removes any side nicks in the blade and allows for a very easy job of removing the sharpening burrs after sharpening.
If the place you get your skates done does all this you have found the sweet heart of skate sharpening... best of luck..but get what your paying for....
-
- Posts: 4345
- Joined: Thu Sep 14, 2006 3:55 pm
Oh Wise guy huh ??Neutron 14 wrote:Can't Never Tried wrote:This is a good topic.....
Knowing a bit about this subject I'll share some insight.
1st it's not so much where you get your skates done it's who's behind the machine and their knowledge of the principles.
The first consideration is the rocker of the blade..this is is determined by the size and style of skater, a smaller light weight agile skater should have a smaller rocker say 11' rocker where as a heavier 6' + tall skater should be closer to the 12'- 13' mark rocker...this is all determined by radial push from the hips to keep maximum contact with the ice thru the stride.
Next is the blade radius this also has a bit to do with size but again more to do with position they play...a smaller size fwd. player that makes a lot of aggressive moves can utilize a deeper radius say as small as 1/4" to 3/8" but will give up speed for the agility.
A defensive player that's more concerned with being able to adjust quickly will also use a smaller radius as speed is not as important as making the quick adjustments to the on coming fwd's.
A bigger fwd. player that needs flat out speed will go as high as 3/4"-1" radius.... they give up the hard cuts for the breakaway speed.
The centering of the radius is probably the most important factor, there should be no more then .002" difference between the the high points on either side of the blade...very few places I've seen actually have a gage to measure this.
After all the above is completed the last factor is the honing of the edges this should be done both before and after the skate is sharpened...the before removes any side nicks in the blade and allows for a very easy job of removing the sharpening burrs after sharpening.
If the place you get your skates done does all this you have found the sweet heart of skate sharpening... best of luck..but get what your paying for....
what about boyer blades??? He seems to know what is going on?Neutron 14 wrote:Can't Never Tried wrote:This is a good topic.....
Knowing a bit about this subject I'll share some insight.
1st it's not so much where you get your skates done it's who's behind the machine and their knowledge of the principles.
The first consideration is the rocker of the blade..this is is determined by the size and style of skater, a smaller light weight agile skater should have a smaller rocker say 11' rocker where as a heavier 6' + tall skater should be closer to the 12'- 13' mark rocker...this is all determined by radial push from the hips to keep maximum contact with the ice thru the stride.
Next is the blade radius this also has a bit to do with size but again more to do with position they play...a smaller size fwd. player that makes a lot of aggressive moves can utilize a deeper radius say as small as 1/4" to 3/8" but will give up speed for the agility.
A defensive player that's more concerned with being able to adjust quickly will also use a smaller radius as speed is not as important as making the quick adjustments to the on coming fwd's.
A bigger fwd. player that needs flat out speed will go as high as 3/4"-1" radius.... they give up the hard cuts for the breakaway speed.
The centering of the radius is probably the most important factor, there should be no more then .002" difference between the the high points on either side of the blade...very few places I've seen actually have a gage to measure this.
After all the above is completed the last factor is the honing of the edges this should be done both before and after the skate is sharpened...the before removes any side nicks in the blade and allows for a very easy job of removing the sharpening burrs after sharpening.
If the place you get your skates done does all this you have found the sweet heart of skate sharpening... best of luck..but get what your paying for....
-
- Posts: 925
- Joined: Thu Jul 13, 2006 8:58 am
- Location: East Metro
I bought my skates there a few years back and they sharpened them before I left... but they hurt my feet and my back so damn bad the first couple of times I skated on them, I didn't really pay attention to the sharpening job. So, I'll give them the benefit of the doubt and say they did a great job!SEC Scotty wrote:Cunningham Sports does a good job.
-
- Posts: 3
- Joined: Sun May 13, 2007 9:43 pm